 |
| |
| Specs: |
|
- Like
all modern race cars, VirtualGT makes extensive use of electronics.
Multiple microprocessors create the illusion that you
are going fast. Very fast.
- The
loudspeaker system is capable of extreme high fidelity
to enable hours of racing without ear fatigue. SRS signal processing
extends the sound field in all directions, putting you "in
the race."
- Four
vibration transducers with 240 Watts of dedicated power
couple to the chassis in strategic locations. They transmit energy
as directly as possible to feet, hands and body.
- Forty
race simulation memories store complex game commands, reducing
car and track selection from more than 30 button presses to only
one.
- Fully
adjustable chassis fits drivers from 7 years old to 7
feet tall. Click here to see demo.
- Built-in
hands-free intercom system with (3) supplied headsets
enable you to communicate with two buddies outside the car when
running at full-race audio levels. This intercom is extendable
between cars so drivers in multi-car systems can talk to each
other and to buddies outside the cars.
|
- A
form-fitting MasterCraft racing seat supports
your body in the correct racing attitude, ready to handle all
the virtual G-force your mind conjures up. You will lean into
the corners comfortably.
- Combined
with a wheel vibration transducer, the force-feedback
steering wheel provides resistance to steering and transmits
the engine and chassis vibrations you would expect from a high
performance race car with a 1000 HP engine and rigid tube frame
chassis.
- Spring-loaded
feet at the four corners of the chassis provide self-leveling
on any surface. These suspension components add
to the sense of motion when racing and the feeling of compliant
mass associated with entering and exiting the vehicle.
- Electronic
controls simplify operation for new drivers and streamline
operation for experienced drivers. You can override factory defaults
with your own settings and restore them anytime with special key
combinations.
- Six
audio setup memories store audio and vibration levels. Use factory
presets or store your favorite setups for every performance level
and condition.
|
|
| What
goes into a VirtualGT? |
|
- VirtualGT
Pro-PC includes a Shuttle XPC high performance gaming computer
with 3 removable hard drives and a library of the world's best
race simulation software, including GTR.
- 82
separate pieces of 9-ply Baltic Birch plywood, computer routed
from 2-1/2 sheets of 4' x 8' material, each piece hand sanded
to a furniture quality finish.
- 670
holes fabricated in the faces and ends of all these pieces with
over 25 different hole sizes ranging from .086"D to 7.25"D.
- 25
custom machined components made from aluminum rod, tube, extrusions,
and Delrin plastic, 10 pieces of these black anodized.
- 21
custom fabricated aluminum sheet metal parts, 11 of these black
anodized, 5 pieces black powder coated, and 2 pieces silkscreened.
- over
1.5 gallons of paint applied in three coats, hand sanded between
coats.
|
- over
70 different wire and cable assemblies, ranging from a single
conductor up to 24 conductors per cable, totaling over 1/8 mile
in total conductor length.
- 13
audio transducers.
- 3/4
of a 4' x 8' sheet of clear Lexan polycarbonate, laser cut into
5 pieces. Four of these pieces are silkscreened with a 2-color
logo, then 2 coats of color, 1 coat of white, and 1 coat of black,
all applied from the inside.
- a
custom designed racing seat with extra width and padding for a
race car look with arm chair comfort. Includes adjustable slide
mechanism and optional custom 5-point harness system.
- 11
printed circuit boards with over 1,100 individual components soldered
to these boards.These boards include (3) microprocessors, a 9-channel
500W power amplifier, a passive crossover with 11 elements per
speaker, audio processor, power supply, and dash electronics.
- over
1000 individual hardware items consisting of screws, nuts, washers,
springs, spacers, standoffs, hinges, wheels, knobs, tubes, rods,
and brackets.
|
|
